When space is at a premium, the SurgeX FlatPak is the perfect wall mount surge protector for TVs, projectors, flat panels, and digital displays. It safeguards them against harmful electrical transients and is easily hidden behind or beside equipment.The FlatPak easily integrates with wall and ceiling mounting systems. Featuring Series Mode technology, the FlatPak surge protector and power conditioner safeguards equipment against surges, spikes, and electrical noise that cause AV equipment malfunction and downtime.
It does not shunt surge energy to the ground and will not produce ground contamination or common-mode disturbances that cause hissing sounds and pixelation on AV equipment. Available in two configurations with over voltage protection, the SA-82 model is engineered for non-networked devices and the SA-82-AR offers remote IP control capabilities for networked devices. This lets technicians control any connected device not currently IP addressable to manage outlets, including on/off, scheduling, AutoPing, and power cycling. If you're looking for a compact solution that offers advanced power protection and installs out of sight, then look no further than the SurgeX FlatPak. Series Mode® power protection technology.Over Voltage Shutdown (with Auto Reset). Detachable 3' grounded 3-wire #18 line cord. Power Requirement (No Load): 8W. Surge Let-Through Voltage (6000 Volt Surge): 0 Volts.
Maximum Applied Surge Voltage: 6000 Volts. Maximum Applied Surge Current: Unlimited (Due to current limiting - 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41). Maximum Applied Surge Energy: Unlimited (Due to current limiting - 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41). Endurance (C62.41-1991 Category B3 Pulses): 1KV > 500,000; 3KV >10,000; 6KV >1,000. Over-Current Auto Shutdown: Circuit Breaker.
Dimensions (HxWxD): 1.75 x 5.31 x 9.06. Temperature Range: 41° to 95°F (5° to 35°C). Humidity Range: 5 to 95% RH, non-condensing.