1/2 HP Horse Power 1 PH Single Phase Heavy Duty Electric Motor DJ141256

  
New 1/2 Hp Electric Motor 141256 Single Phase 56 CFrame 1800 RPM 115/230 V. The listing is about brand new.

An electrical machine that converts electrical energy into mechanical energy. This is a 0.5 hp electric motor that is commonly used for the matching of water pumps, agricultural machinery and general equipment. A 115/230 volt electric motor that turns at 1800 RPM. A single phase motor that has a rigid base and 5/8 inch diameter keyed shaft. With the new motor you're purchasing, it's vitally important that you match up the specs on your old motor.

All of the information you need to know can be found right on your electric motors nameplate/sticker, which usually can be found on the side of the motor. Below is a quick check list for you to reference when sizing up the right motor for your application. The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. It's extremely important that you replace it with the same frame size. Improperly sized motors will inevitably result in motor failures. If your machine requires a 230V electric motor on single phase power. You would want to incorporate a 1-phase 230V AC electric motor for your application.

230V electric motors cannot handle voltages less than 208V. They will run too hot and you will experience motor failure. Matching up the RPM is quite important.

The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood. Example: 3510rpm, 3550rpm, 3450rpm are all the same. They are all fall under the umbrella of whats known as 3600RPM motors. Measure the outside diameter on your electric motors shaft.

By matching up the proper shaft diameter, you will be able to reuse the original motor pulley that came on your machine. 0.5 HP 1800 RPM and 56 frame. Single phase with 5/8 inch keyed shaft. Waterproof can be used outdoors.

Converts electrical energy into mechanical energy. Applicable to the matching of water pumps.

Suit for agricultural machinery and general equipment. Full load amps: 8.8/4.4 A. Shaft diameter: 5/8 inch Keyed shaft. Shaft length: 1.875 inch. Package size: 40 x 27 x 27 cm (15.75 x 10.63 x 10.63 inch).

Gross weight: 14.7 kg (32.41 lbs). We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.

All emails will be responded to within. Special circumstances will be listed clearly in the listing.

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item.

The item "1/2 HP Horse Power 1 PH Single Phase Heavy Duty Electric Motor DJ141256" is in sale since Thursday, April 11, 2019. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors". The seller is "digitalzoneproduct" and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico, Germany.

• Brand: VEVOR
• MPN: RCXZC005541525938449
• Model: VR-141256
• Mounting Type: Rigid
• Current Type: AC
• Nominal Rated Input Voltage: 115 V,230 V
• AC Frequency Rating: 60 Hz
• AC Motor Type: Induction/Asynchronous
• AC Phase: Single Phase
• Base RPM: 1800
• Enclosure Type: TEFC (Totally Enclosed Fan Cooled)
• Full Load Amps: 8.8/4.4 A
• Insulation Class: B (Max 266°F)
• NEMA Frame Suffix: 56
• Rated Load (HP): 1/2
• Reversible/Non-Reversible: Reversible
• Service Factor: 1.15
• Shaft Diameter: 5/8 in
• IP Rating: 55
• Shaft Type: Keyed
• Horsepower: 0.5 HP
• Frame: 56C Frame
• Shaft length: 1.875 inch
• Package size: 40 x 27 x 27 cm (15.75 x 10.63 x 10.63 inch)
• Gross weight: 14.7 kg (32.41 lbs)