10 Ton Heavy Duty Auto Body Frame Porta Power Hydraulic Jack Repair Kit Ram Lift
10 Ton Heavy Duty Auto Body Frame Porta Power Hydraulic Jack Repair Kit Ram Lift. Package Content:(1 x 10 Ton Hydraulic Jack) 1 x Hydraulic Hand Pump 1 x Jack Hose 1 x 10-Ton Ram 1 x Spreader Ram 3 x Extension Tubes 1 x Male Connector 1 x Flat Base 1 x 90°V Base 1 x Wedge Head 1 x Spreader Plunger Toe 1 x Spreader Ram Toe 1 x Flex Head 1 x Serrated Saddle 1 x Carry case. (1 x 10 Ton Hydraulic Jack) 1 x Hydraulic Hand Pump 1 x Jack Hose 1 x 10-Ton Ram 1 x Spreader Ram 3 x Extension Tubes 1 x Male Connector 1 x Flat Base 1 x 90°V Base 1 x Wedge Head 1 x Spreader Plunger Toe 1 x Spreader Ram Toe 1 x Flex Head 1 x Serrated Saddle 1 x Carry case. Maximum load can not exceed the rated capacity - The load can not exceed the half of the capacity when all tubes used - The extension of the piston can net exceed the stroke. After using, close the valve with the cover, to keep the oil free from the dust and dirt - Before lifting, adjust the jack slowly to make the load coaxial with resnect to jack - Tube can not be bent, near to the catting tools and fires, also can not put the weight on it. Constructed with carbon steel(main part), #45 steel rod for high strength and non-broken. Cast iron bases, stable & heavy duty load capacity. Equip with 2M(78.7) length hose, longer than products on market(normally their tubes are 1.2M length), more flexible on real use. Industrial-level multi purpose porta power jack can be used for automotive, truck, farm and heavy equipment repair. This hydraulic jack kit accepts No. If it is not sufficient, please add the same kind of hydraulic oil before using. Easy snap-on design, make benting automobile frames and heavy lifting works easier and power-saving. All the 15 parts can be stored in the case. It is portable, easy to carry everywhere.
Also can prevent device get lost. 29" x 16" x 7. The note there will NOT be read. The images shown are not the actual item and are for your reference only.
OR, you may choose to have a replacement. FEEDBACK IS VERY IMPORTANT TO US. Ignition Control Module Fits 98 Volkswagen Passat GLS Wagon 4-Door LX920 6H1022. STAINLESS RACING MANIFOLD HEADER/EXHAUST for 1992 1993 FORD MUSTANG 5.0 V8. Ignition Distributor w/ Red Cap Small Block Fits Ford 289 302 V8 Ready to Run. Brand New Wide Angle Mirrors Pair Black For 2002-18 International Durastar 4300. 2 Rear Liftgate Hatch Tailgate Lift Supports Struts For Town & Country 2001-07. Qty(2) For Honda Accord 2003 To 2007 Front Hood Gas Lift Supports Struts Shocks. 2 Liftgate Hatch Tailgate Gas Lift Supports For 99-04 Suburban Tahoe GMC Yukon. Wheel Stem Air Valve Cap. The item "10 Ton Heavy Duty Auto Body Frame Porta Power Hydraulic Jack Repair Kit Ram Lift" is in sale since Tuesday, October 15, 2019. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Jacks & Jack Stands". The seller is "top-liftsupport" and is located in Ontario, California. This item can be shipped worldwide.
- Brand: adv
- Manufacturer Part Number: ADV107137LIFT
- Kit or Single Part: Kit
- Warranty: 1 Year
- UPC: Does not apply
- Color: Red
- Lifting Capacity (Tonne): 10 Ton
- Drive: Air
- Type: Hydraulic Power Jack kit
- Suitable for: Vehicle/Car
- Custom Bundle: No
- Modified Item: No
- Ship from: Ontraio, California
- User Manual: Yes
- Material: Carbon Steel
- Size: 29" x 16" x 7"